Clopay Commercial Garage Doors

10

INTELLICORE INSULATED DOORS 3700 SERIES
R-values to 22.2
ModelThicknessEmbossExterior SteelPatternIntellicore LogoR-Value*Std Max Width**Std Max Height
37303″Stucco27 GaugeRibbed
Intellicore
22.230’2″20’0″
37222″Stucco20 GaugeFlush
18.432’2″20’0″
37242″Stucco24 GaugeRibbed
18.436’2″20’0″
37202″Stucco27 GaugeRibbed
18.436’2″20’0″
37171 3/4″Stucco27 GaugeRibbed
16.224’2″20’0″
37181 3/4″Stucco27 GaugeFlush
16.224’2″20’0″
37151 3/8″Stucco27 GaugeRibbed
12.918’2″16’0″

*Calculated door section R-value is in accordance with DASMA TDS-163
**For sizes over 32’2″ wide consult factory for specific configuration requirements.

Intellicore doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay commercial dealer for option availability.

Design Options:

  • Windows
  • 24″x8″
  • 24″x12″
  • Full View (pre-painted white or brown or clear anodized)
  • Black frame Window with Rounded Corners

Colors:

  • White – All Models
  • Brown – All Models
  • Black – 3724
  • Tan – 3715, 3717, 3718, 3724
  • Gray – 3715, 3717, 3718, 3724
  • ColorBlast – All models

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Outside keyed Security Lock
  • Double End Stiles
  • Design pressure rated (WindCode)
  • Impact Rated
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals

Custom Options:

  • Mullions
  • Breakaway Sections
  • Pass Door

MODEL 3730

features 3730
Panel Design:3″ thick stucco embossed ribbed steel exterior
Steel Gauge:27 gauge (.016″ min) exterior; 28 gauge (.015″ min) interior
Joint Design:Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:R-value 22.2* for maximum energy efficiency
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Snow mist white, commercial brown, ColorblastTM
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship

MODEL 3720 / 3724 / 3722

features 3720, 3724, 3722
Panel Design:(3720 & 3724) 2″ thick stucco embossed steel exterior with minor ribbed pattern(3722) 2″ thick stucco embossed flush steel exterior
Steel Gauge:(3720) 27 gauge (.016″ min) exterior; 28 gauge (.015″ min) interior
(3724) 24 gauge (.022″ min) exterior; 28 gauge (.015″ min) interior
(3722) 20 gauge (.034″ min) exterior; 28 gauge (.015″ min) interior
Joint Design:Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:R-value 18.4* for maximum energy efficiency
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:(3720 & 3722) Pre-painted snow mist white, commercial brown
(3724) Pre-painted snow mist white, brown, commercial tan, gray and Trinar white
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship

MODEL 3717 / 3718

features 3717 and 3718
Panel Design:(3717) 1 3/4″ thick stucco embossed steel exterior with minor ribbed pattern(3718) 1 3/4″ thick stucco embossed flush steel exterior
Steel Gauge:27 gauge (.016″ min) exterior; 28 gauge (.015″ min) interior
Joint Design:Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:R-value 16.2* for maximum energy efficiency
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted snow mist white, commercial brown, tan or gray. Optional Trinar white.
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship

MODEL 3715

features 3715
Panel Design:1 3/8″ thick stucco embossed steel with minor ribbing
Steel Gauge:27 gauge (.016″ min) exterior; 28 gauge (.015″ min) interior
Joint Design:Tongue & groove section with continuous foam thermal break prevents cold or heat from passing through the section
Thermal Conductivity:R-value 12.9* for maximum energy efficiency
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted snow mist white or commercial brown, tan and gray
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship

*Calculated door section R-value is in accordance with DASMA TDS-163

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details

1

POLYSTYRENE INSULATED DOORS 3150, 3200, 3300
SERIES
R-values to 12.15
ModelSection
Thickness
EmbossExt. Skin
Pattern
Ext. Steel
Gauge
R-Value*Thermal BreakMax WidthMax Height 
33003″StuccoLight ribbed25 gauge12.15Thermally broken28’2″20’0″ 
32202″StuccoFlush panel20 gauge9.1Thermally broken26’2″20’0″ 
32002″StuccoLight ribbed24 gauge9.1Thermally broken26’2″20’0″ 
32112″WoodgrainFlush panel24 gauge9.1Thermally broken26’2″18’0″ 
32132″WoodgrainRaised panel24 gauge9.1Thermally broken24’2″18’0″ 
31501-3/8″StuccoLight ribbed27 gauge6.5Thermally broken16’0″16’0″ 
31551-3/8″WoodgrainFlush panel27 gauge6.5Thermally broken16’0″16’0″ 
31541-3/8″WoodgrainRaised panel27 gauge6.5Thermally broken16’0″16’0″


*Calculated door section R-value is in accordance with DASMA TDS-163

Polystyrene doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay commercial dealer for option availability.
Design Options:

  • Windows
  • 24″x8″
  • 24″x12″
  • Full View (pre-painted white or brown or clear anodized)
  • Black frame Window with Rounded Corners

Colors:

  • White – All Models
  • Brown – All Models
  • Black – 3200
  • Tan – 3150, 3200
  • Gray – 3150, 3154, 3155, 3200
  • Trinar White – 3200, 3211, 3213
  • Desert Tan – 3154, 3155, 3211, 3213
  • Hunter Green – 3154, 3155
  • Sandtone – 3154, 3155, 3211, 3213
  • Almond – 3154, 3155, 3211, 3213
  • ColorBlast – All models

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Outside keyed Security Lock
  • Double End Stiles
  • Design pressure rated (WindCode)
  • Impact Rating
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals

Custom Options:

  • Mullions
  • Breakaway Sections
  • Pass Door

MODEL 3300

FEATURES 3300
Panel Design:3″ thick roll formed stucco embossed steel with minor ribbed pattern
Steel Gauge:25 gauge (.019″ min) exterior; 27 gauge (.016″ min) interior
Joint Design:Tongue & groove sectional joint with silicone filled thermal break prevents cold or heat from passing through the section
Thermal Conductivity:R-Value 12.15*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted white or brown
Limited Warranty:10-year paint / 5-year delamination / one-year material & workmanship
 

MODEL 3200 / 3220

features 3200 and 3220

Panel Design:2″ thick stucco embossed steel with light ribbed (3200) or flush (3220) pattern
Steel Gauge:24 gauge (.22″ min) exterior (3200)
20 gauge (.034″ min) exterior (3220)
27 gauge (.016″ min) interior
Joint Design:Tongue & groove section joint with silicone filled thermal break prevents cold or heat from passing through the section
Termal Conductivity:R-value 9.1*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted white, brown, tan or gray (3200)
Pre-painted white or brown (3220)
Trinar white (3200)
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship
 

MODEL 3150 / 3154 / 3155

features 3150, 5154, 3155
Panel Design:1-3/8″ thick stucco embossed steel with micro groove pattern (3150)
1-3/8″ thick rasied woodgrain embossed steel (3154)
1-3/8″ thick flush woodgrain embossed steel (3155)
Steel Gauge:27 gauge (.016″ min) exterior; 27 gauge (.016″ min) interior
Joint Design:Tongue & groove section joint with silicone filled thermal break prevents cold or heat from passing through the section
Termal Conductivity:R-value 6.5*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted white, brown, commerical tan & gray (3150)
Pre-painted white, brown, desert tan, hunter green, almond, sandtone, bronze (3154, 3155)
Limited Warranty:10-year paint / 10-year delamination / one-year material & workmanship
 

*Calculated door section R-value is in accordance with DASMA TDS-163.

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details

2

Vinyl or Steel Back Series
ModelSection ThicknessEmbossExt. Skin PatternExt. Steel GaugeBackerR-value*Max Width**Max Height
520S2″SmoothMinor & Deep Ribs20 Gaugepre-painted 30 gauge steel back cover6.626’2″20’0″
524V2″SmoothMinor & Deep Ribs24 Gaugepolyethylene vinyl back cover6.626’2″20’0″
524S2″SmoothMinor & Deep Ribs24 Gaugepre-painted 30 gauge steel back cover6.624’2″20’0″
525V2″SmoothMinor & Deep Ribs25 Gaugepolyethylene vinyl back cover6.626’2″16’0″
525S2″SmoothMinor & Deep Ribs25 Gaugepre-painted 30 gauge steel back cover6.620’2″16’0″
664V2 1/8″WoodgrainRaised Panel24 Gaugepolyethylene vinyl back cover6.320’2″16’0″

 

*Calculated door section R-value is in accordance with DASMA TDS-163

Insulated Economy doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay commercial dealer for option availability.
Design Options:

  • Windows
  • 24″x8″
  • 24″x12″
  • Full View (pre-painted white or brown or clear anodized)
  • Black frame Window with Rounded Corners

Colors:

  • White – All Models
  • Brown – All Models
  • Tan – 524S, 524V
  • Gray – 524S, 524V
  • Trinar White – 525S, 524V
  • Desert Tan – 664V
  • Hunter Green – 664V
  • Sandtone – 664V
  • Almond – 664V

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Outside keyed Security Lock
  • Double End Stiles
  • Design pressure rated (WindCode)
  • Impact Rated
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals

Custom Options:

  • Mullions
  • Breakaway Sections
  • Pass Door

MODEL 525V / 525S

features_525V-525S
Panel Design:2″ thick roll formed smooth steel with combination of deep minor ribs
Steel Gauge:25 gauge (.019″ min)
Joint Design:Tongue and groove
Thickness /Insulation1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (525V)

1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (525S)

Thermal Conductivity:R-Value 6.6*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
Colors:Pre-painted white or brown
Limited Warranty:10-year paint / one-year material & workmanship

MODEL 524V / 524S

features_524V-524S
Panel Design:2″ thick roll formed stucco embossed steel
Steel Gauge:24 gauge (.022″ min) ribbed steel sections
Joint Design:Tongue and groove
Thickness /Insulation1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (524V)

1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (524S)

Thermal ConductivityR-Value 6.6*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
ColorsPre-painted white, brown, tan or gray
Limited Warranty:10-year paint /one-year material & workmanship

MODEL 520S

features_520S
Panel Design:2″ thick roll formed stucco embossed ribbed steel
Steel Gauge:20 gauge (.034″ min) for maximum dent resistance
Joint Design:Tongue and groove
Thickness /Insulation1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover
Thermal ConductivityR-Value 6.6*
Paint System:3-stage paint process delivers maintenance free finish that resists rust perforation
ColorsPre-painted white or brown
Limited Warranty:10-year paint / one-year material & workmanship

MODEL 664V

652 Cutaway Art
Panel Design:1-7/8″ thick woodgrain embossed raised panel steel
Steel Gauge:24 gauge (.022″ min) ribbed steel sections
Joint Design:Tongue-and-groove
Thickness /Insulation1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover
Thermal ConductivityR-Value 6.3*
Paint System3-stage paint process delivers maintenance free finish that resists rust perforation
ColorsPre-painted white, brown, tan or gray; Trinar white or beige
Limited Warranty:10-year paint / one-year material & workmanship

*Calculated garage door section R-value is in accordance with DASMA TDS-163.

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details

ModelSection ThicknessPanel SpacingMax Width**Max Height
9022″44″ on center, end panels vary24’2″20’0″
9032″Equal panel spacing24’2″20’0″

Full Vision doors come with a variety of options to address your building requirements. Along with a variety of finishing options and glazing materials, full view doors can be designed with additional stiles or custom section arrangements, creating a unique look with design flexibility.

Design Options:

Glazing Material

  • 1/2″ (12.7 mm) insulated
  • 1/2″ (12.7 mm) insulated tempered
  • 1/8″ (3.2 mm) tempered
  • 1/4″ (6.4 mm) tempered
  • 1/8″ (3.2 mm) plexiglass
  • 1/4″ (6.4 mm) wire glass
  • 1/8″ (3.2 mm) DSB glass
  • 1/4″ (6.4 mm) polycarbonate
  • Custom glazing options available

Finishing Options:

Standard finished include white or brown painted and clear anodized finish.

Premium finishing options include:

  • RAL color powder coat
  • Custom powder coating
  • Bronze, dark bronze, black or custom color anodized finishing

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Double End Stiles
  • Carbon monoxide vents
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals
  • Options to meet Wind load design pressure levels

Custom Options:

  • Mullions
Panel Design:Recessed aluminum panel
Gauge:0.75″ thick extrusions .050″ aluminum panels
Joint Design:Tongue and groove with built in reinforcing fin
Thickness:2-1/8″
Colors:Clear, bronze, black, anodized, white, commercial brown. Custom colors available.
Limited Warranty:5-year finish / 1-year material & workmanship

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details

4

Pass Doors, Breakaway Bottom Doors, Dock Seals, and Chain Link and Security Screen Doors.

Pass Doors

Pass doors are ideal in applications where space is too limited for the installation of a standard entry door. They conserve energy by allowing building access via a smaller opening versus the entire sectional door, this minimizes wear and tear on the door as well saves electric operator cycles. In inclimate weather, the heat or cold distribution between inside and outside of the building is minimized, conserving additional energy costs.

Available On3720, 3722, 3724, 3200 and 3220 insulated models as well as 520 and 524 series non-insulated models

 

Break-away Bottom Sections

Break-away bottom sections will release from the track and swing up to a full 45 degree angle inward or outward, preventing further damage to the door.

Available On3724, 3722, 3720, 3718, 3717, 3220, and 3200 models as well as all 520 series and all 524 series.

 

Chain Link and Screen Security Doors

Screen and chain link security doors are a cost-effective way to add security, pest control and ventilation to your facility.

81111 gauge galvanized steel, chain link security door.
8121-1/2″ or 1-7/8″ thick aluminum frame with stainless steel mesh screens

 

Dock Seals

Dock seals and shelters provide protection from the weather for your dock and personnel in almost every application. They seal loading docks against changes in the environment that can cost you time and money.

DS100Compressible Foam Dock Seal
DS140Adjustable Head Curtain Dock Seal
DS200Rigid Dock Shelter

Features – Pass Door

welded aluminum frame - pass doorWelded aluminum frame with shiplap design affords added strength and durability while providing a weather-tight door seal. Rain cap feature protects door entrance against accumulated water during rain showers.
geared hinge - pass doorGeared hinge ensures smooth operation and enhances longevity of the pass door.
closer - pass doorCommercial door closer ensures safe and quiet closure.
continuous boxed channelContinuous boxed channel bottom rail adds additional strength against wind and horizontal deflection.

Features – Break-away Bottom Section – View Video

 Clopay’s Break-Away Bottom Section releases from the track and will swing up to a full 90 degree angle inward or 45 degrees outward, preventing further damage to the door.
 Bottom section snaps back into place in less than a minute.
 Inside of section has fiberglass protective panel to prevent damage to the door.
 Optional inside slide lock provides additional security. Padlock may be applied.
 Specifications:
  • Doors must have at least 24″ of hi-lift.
  • 36″ of headroom required.
  • Not compatible with door drop safety device/bottom brackets.
  • Not compatible with doors requiring a double torsion shaft
 Warranty:1 Year Limited Construction

 

Features – 811

Panel Design:2-1/2″ x 1-1/2″ aluminum frame
Panel Inserts:11 gauge galvanized steel chain link with2″ diamond openings
Panel Thickness:1-1/2″ thick aluminum
Joint Design:Flat block meeting rail
Thermal Conductivity:None
Hardware:Commercial grade hinges, rollers and brackets
Colors:Mill finished aluminum, powder coating optional
Limited Warranty:1-year material and workmanship

 

Features – 812

Panel Design:1-1/2″ or 1-7/8″ thick extruded aluminum rails
Panel Inserts:304 stainless steel in 12 x 12 or 30 x 30 mesh
Panel Thickness:1-1/2″ or 1-7/8″ thick
Joint Design:Interlocking rails
Thermal Conductivity:None
Hardware:Commercial grade hinges, rollers and brackets
Colors:Mill finished aluminum, powder coating optional
Limited Warranty:1-year material and workmanship

 

Features – DS100/DS140

Pad Design:High density polyurethane foam bonded to quality treated wood framing
 22 oz, 40 oz or 50 oz vinyl-coated polyester fabric

24″ high head curtain with 24″ splits and hook & loop fasteners (DSI40 only)

 Full length 3″ wide yellow guide stripe on side panels
 Nylon mesh breather panels on side and head pads

Side and top seals available with beveled edges

Colors:Standard color is black. Optional brown, blue green (50 oz vinyl available black only)
  
Hardware:Rust-resistant mounting hardware
Warranty:1 year

 

Features – DS200

Pad Design:Pressure treated wood framing with translucent fiberglass top and 32 oz vinyl sides
 40 oz vinyl-coated fabric top and side face curtains mounted over a rigid frame
 Head curtain with vinyl-coated wear pleats at each end; sloped header to provide drainage; exterior frame corners trimmed with aluminum angle
 PVC bottom panels with highly visible yellow guide stripe
Colors:Standard color is black. Optional brown, blue green (50 oz vinyl available black only)
Guards:Two 6″ steel channel guards to support and protect frame
Hardware:Rust-resistant mounting hardware
Warranty:1 year

5

500, 600 Series
(20, 24, 25 Gauge Steel)
ModelThicknessSteel GaugePanel DesignMax WidthMax Height
5202″20 gaugeribbed steel26’2″20’0″
5242″24 gaugeribbed steel24’2″20’0″
66421/8″24 gaugeraised panel steel20’2″16’0″
5252″25 gaugeribbed steel20’2″16’0″

Non-insulated doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay commercial dealer for option availability.

Design Options:

  • Windows
  • 24″x6″
  • 24″x12″
  • Full View (pre-painted white or brown or clear anodized)
  • Black frame Window with Rounded Corners

Colors:

  • White – All Models
  • Brown – All Models
  • Tan – 524
  • Gray – 524
  • Trinar White – 524
  • Desert Tan – 664
  • Hunter Green – 664
  • Sandtone – 664
  • Almond – 664

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Outside keyed Security Lock
  • Double End Stiles
  • Design pressure rated (WindCode)
  • Impact Rated
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals

Custom Options:

  • Mullions
  • Breakaway Sections
  • Pass Door

Features – 520/524/525

Panel Design:2″ thick roll formed ribbed steel 
Steel Gauge:20 ga (.034″ min) – Model 520, 24 ga (.022″ min) – Model 524and 25 ga (.019 min) – Model 525 ribbed steel sections
Joint Design:Tongue and groove
Thickness/Insulation:No insulation
Hardware:14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs
Colors:Pre-painted white or brown (520/525)
Pre-painted white, brown, tan or gray (524)
Limited Warranty:10-year finish against rust / one-year material & workmanship

 

Features – 664

Panel Design:1 7/8″ thick roll formed steel 
Steel Gauge:24 gauge (.22″ min) raised panel door
Joint Design:Tongue and groove
Thickness & InsulationNo insulation
Hardware:14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs
Colors:Pre-painted snowmist white, chocolate, brown, almond, sandstone, or desert tan.
Limited Warranty:10-year finish against rust through / one-year material & workmanship

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details

6

SERVICE DOORS CESD SERIES

Commercial Garage Doors: Service Doors

 SERVICE DOOR
CESD10Standard Heavy Duty Service Door
CESD20Insulated Heavy Duty Service Door

FIRE RATED DOOR

CERD10Standard Heavy Duty Fire Rated Door
CERD20Insuated Heavy Duty Fire Rated Door

SMOKE RATED DOOR

CERD11Standard Heavy Duty Fire & Smoke Rated Door
CERD21Insulated Heavy Duty Fire & Smoke Rated Door

Commercial Garage Doors: Coiling / Roll Up Sheet Doors

Constructed from 26ga by 24 in wide sheets of steel roll formed with integral grooves that are hemmed together to form a continuous sheet guided vertically by roll formed guides. Sheet coils around a spring loaded shaft above the header as the door is opened. Designed with ease of installation in mind.

160C Heavy Duty12″ Coil
157CMedium Duty12″ Coil
150CLight Duty9″ Coil

SERVICE DOORS (CESD)

Service Doors (CESD) are manufactured from 2 5/8″ wide metal slats roll formed to interlace together to create a continuous steel curtain. They are used to provide security against entry or weather protection at exterior or interior openings in industrial, commercial, institutional and other buildings.

 

CESD10 STANDARD HEAVY DUTY SERVICE DOORS

Sizes:30′ wide, 30′ high standard construction. Large openings to 50′ wide, 40′ high, consult factory.
Operation:Motors, chain, hand-crank or push-up designs based on size, weight or frequency of operation.
Usage:Standard construction is up to 20 cycles per day with High Cycle Construction available for doors expected to be operated more than 20 cycles per day, i.e. parking garages, sally ports.
Fast Acting Doors:For high traffic openings or where air flow or temperature control is critical, doors can be designed to operate at more than twice the speed of typical doors, or up to 2 ft./sec.
Wind Load:Doors can be configured to withstand the full range of specific wind load requirements including missile impact ratings. Also refer to WindCode Section.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Standard door curtains are availalbe in 24, 22, 20 and 18 gauge galvanized steel in light gray, white or tan. Also 20 gauge 300 series stainless steel with # 4 finish or #16 B&S gauge aluminum with mill, clear or color anodized finish.
Locks:Wall mounted chain keeper or zinc plated steel slide bolt with padlock provisions
Operation:Chain hoist is standard; motor or manual operation is optional
Colors:

Warranty:

White, gray, tan

2-year warranty against defects in materials and workmanship

CESD20 INSULATED HEAVY DUTY SERVICE DOORS

 

Sizes:30′ wide, 30′ high standard construction. Large openings to 50′ wide, 40′ high, consult factory.
Operation:Motors, chain, hand-crank or push-up designs based on size, weight or frequency of operation.
Usage:Standard construction is up to 20 cycles per day with High Cycle Construction available for doors expected to be operated more than 20 cycles per day, i.e. parking garages, sally ports.
Fast Acting Doors:For high traffic openings or where air flow or temperature control is critical, doors can be designed to operate at more than twice the speed of typical doors, or up to 2 ft./sec.
Wind Load:Doors can be configured to withstand the full range of specific wind load requirements including missile impact ratings. Also refer to WindCode Section.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Exterior and interior slats are ASTM A 653 galvanized steel with exclusive finish in light gray, tan or white (available 24/24 ga only). Powder coated finish is optional. Exterior skin is available in 24, 22, 20 and 18 gauge with combination exterior and interior slats being – 24/24, 22/24, 20/24, 18/24 and 22/22. Exterior and interior skins are also available in 22 gauge 300 series stainless steel with #4 finish and #18 B&S gauge aluminum with mill, clear or color anodized finish.

FIRE DOORS (CERD)

Fire Doors (CERD) are available insulated and non-insulated, provide automatic closing in the event of fire detection with governed speed control. Fire doors also designed for use as a service door to provide security and access control in openings that are not part of a required means of egress.

 

CERD10 STANDARD HEAVY DUTY FIRE RATED DOORS

Listings:UL Classified 4HR, 3HR, 90MIN, 1HR AND 3/4HR labels and Factory Mutual Approval.
Sizes:30′ wide, 30′ high standard construction. Large openings to 50′ wide, 40′ high, consult factory.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Curtains are availalbe in 22, 20 and 18 gauge galvanized steel in light gray or tan. Powder coating is available as an option, or 20 gauge 300 series stainless steel with #4 finish. Stamped steel or cast iron endlocks are provided per UL procedure. Click HERE for additional Material & Finishes Information.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved all types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Chain hoist is standard; motor or manual operation is optional

 

CERD20 INSULATED FIRE DOORS

Listings:UL Classified 4HR, 3HR, 1 1/2HR, 3/4HR classified labels. Flame spread and smoke development index factors for the insulated fire door’s mineral wool insulation are zero.
Sizes:30′ wide, 22′ high standard construction. Large openings to 34′ wide, consult factory.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Exterior/Interior curtain skin – galvanized steel in light gray or tan or optional powder coating is available. 300 series stainless steel with #4 finish. Cast iron endlocks/windlocks are required per UL procedure. Click HERE for additional Material and Finishes information.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Motor, chain or crank operating systems are recommended for ease of testing and controlled automatic closing speed.

 

SMOKE RATED DOORS (CERD)

Smoke rated doors add tested smoke and draft control to fire doors and counter fire doors. Use to protect interior corridors and smoke barrier openings or any opening where life safety is a priority.

 

CERD11 STANDARD HEAVY DUTY FIRE & SMOKE RATED DOOR

Listings:UL Classified for fire protection and the loss of property and also UL, “S” leakage rated assembly labeled for smoke and draft control.

SmokeShield products meet the requirements of the International Building Code, 2006, Section 715.4.3. for Smoke-and-Draft Control Door Assemblies

Tested per UL 1784, the procedure for smoke-and-draft control door assemblies. Meets the requirements of NFPA 105

Sizes:30′ wide, 25′ high standard construction. Large openings to 34′ wide, consult factory.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Exterior/Interior curtain skin – galvanized steel in light gray or tan or optional powder coating is available. 300 series stainless steel with #4 finish. Cast iron endlocks/windlocks are required per UL procedure. Click HERE for additional Material and Finishes information.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Motor, chain or crank operating systems are recommended for ease of testing and controlled automatic closing speed.

 

CERD21 INSULATED HEAVY DUTY FIRE & SMOKE RATED DOOR

Listings:UL Classified 4HR, 3HR, 1 1/2HR, 3/4HR classified labels. Flame spread and smoke development index factors for the insulated fire door’s mineral wool insulation are zero.
Sizes:30′ wide, 22′ high standard construction. Large openings to 34′ wide, consult factory.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Exterior/Interior curtain skin – galvanized steel in light gray or tan or optional powder coating is available. 300 series stainless steel with #4 finish. Cast iron endlocks/windlocks are required per UL procedure. Click HERE for additional Material and Finishes information.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Motor, chain or crank operating systems are recommended for ease of testing and controlled automatic closing speed.

7

Counter Doors / Shutters Counter Doors / Shutters

Commercial Garage Doors: Counter Doors / Shutters

 COUNTER DOOR

Rolling Counter doors, also called counter shutters, secure openings above counters and other similar finished openings on interior and exterior walls. These doors can also be used for smaller door openings and close to the floor when the more compact door components are required.

CESC10Standard Counter Door / Shutter
CESC20Standard Counter Door with Integral Frame
 FIRE RATED COUNTER DOOR

Clopay’s Rolling Counter Fire Doors with Integral Frame and Countertop, also referred to as Labeled Package Units, are assembled and welded at the factory for a seamless, custom-built look. Units may be fitted to pass window openings without field assembly, becoming an important time saver.

CERC10Standard Fire Rated Counter Door / Shutter
CERC20Standard Fire Rated Counter Door with Integral Frame

Commercial Garage Doors: Counter Doors / Shutters

 COUNTER DOOR
CESC10Standard Counter Door / Shutter
CESC20Standard Counter Door with Integral Frame

FIRE RATED COUNTER DOOR

CERC10Standard Fire Rated Counter Door / Shutter
CERC20Standard Fire Rated Counter Door with Integral Frame

CESC10 Standard Counter Door/Shutter

Sizes:21′ wide, 10′ high standard construction.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Curtains are availalbe in #18 B&S gauge or extruded .055″ aluminum with clear or color anodized finish, 22 gauge galvanized steel in light gray or 22 gauge stainless steel with #4 finish. Powder Coating optional.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Standard motor, hand crank or push-up designs are available based on size and weight. Lifting the counter door requires no more than 25lbs of force. Concealed tubular motors provide a solution for strict dimensional limitations around the header or aesthetic requirements that lend themsleves to its smaller, compact design.

 

CESC20 Standard Counter Door with Integral Frame

Sizes:11’7″‘ wide, 4’ 10″‘ high in walls 4″ to 13″ thick.
Wind Load:Doors can be designed to meet specific PSF wind Load requirements.
Seismic Performance Validation:Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Materials & Finishes:Integral welded head and jambs are formed of 16 gauge 300 series #4 finish stainless steel shapes or 16 gauge primed steel shapes. Curtain material: aluminum slats are clear or color anodized; galvanized steel in light gray; stainless steel is 300 series in #4 finish. Powder Coating optional on non-stainless components.
Mounting:Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Operation:Push-up or hand crank.

 

FIRE RATED COUNTER DOOR

CERC10 Counter Fire Doors

Counter Fire Door Listings:UL 3 HR, 1 1/2 HR, 1 HR and 3/4 HR Classified labels. Counter Fire Doors are listed with the Office of the California State Fire Marshal.
Sizes:Fits openings up to 16′ wide when height is 7’6″ or less, or openings up to 12′ wide when height is 10′ or less.
Smoke Control Counter Fire Doors:Add optional UL Classified smoke and draft control to counter fire doors. Containing smoke saves lives and building property and also aids in fire containment by slowing oxygen flow to the fire source. This added protection is easy to add to your building and may be required by your local building code. More Smoke Control information here.
Material and Finishes:curtains are available in 22 gauge galvanized steel in light gray, powder coating is an available option, or 22 gauge 300 series stainless steel with #4 finish. Galvanized steel endlocks are provided per UL procedure. Additional Material and Finishes information
Counter Fire Door Mounting:Approved wall types for mounting include rated drywall, masonry, or steel walls.
Operation:motor, chain or crank operating systems are recommended for ease of testing and controlled automatic closing speed. Click on the Operator Information button at right for a full description of these systems. Push up is available for counter fire doors up to 80 sq. ft. where usage and testing is infrequent.
UL Classified 1 1/2 Hour Countertops:when used in conjunction with fire rated counter doors, countertops must also be fire rated. Clopay offers UL classified countertops in two materials:
– Plastic laminate countertops – available in a range of standard laminates in a single piece up to 10′ wide, and in two pieces with center joint to 16′ wide.
– 14 gauge, #4 finish stainless steel countertops are custom designed to a maximum wall opening width of 11’2″ for face of wall units, 11’10” for between jambs, for a maximum 12″ wall thickness.

 

CERC20 Counter Fire Doors

Listings:UL 11/2 HR, 1 HR and 3/4 HR Classified labels.
Sizes:Openings up to 10′ wide by 4′ 9″ high in walls 4 1/2″ to 12″ thick.
Smoke Control Gasketing available:UL listed perimeter smoke seals / UL tested vinyl astragal are available for providing protection against smoke infiltration at head, guide frames and sill.
Mounting:Approved for mounting to rated drywall or masonry wall construction. Between Jambs Slip-In units are set into finished walls. Between Jambs Built-In units wrap around finished walls; installation is done while wall is being constructed.
Operation:Manual push up operation only. Release Devices and Annunciators are available. See fire door page for details.
Material and Finishes:Curtains are available in 22 gauge galvanized steel in light gray, powder coating is an option, or #22 gauge 300 series stainless steel with #4 finish.
Countertops:Integral 300 series stainless steel with #4 finish countertops are standard. Separate UL labeled plastic laminate countertops available. Or, choose a No-Countertop option for openings with an existing countertop.

8

SECURITY GRILLES CESG SERIES

Commercial Garage Doors: Coiling Security Grilles

 SECURITY GRILLES
CESG10Rolling Grille Standard Grille Pattern
CESG11Lexan Glazed Rolling Grille
CESG12Rolling Grille Brick Grille Pattern

 

 SIDE FOLDING GRILLE
CESG30Side Folding (accordion) Grille Standard Pattern
CESG31Side Folding Lexan or Solid Grille
Open air models grilles provide security while allowing full visual access and air circulation. Full closure models provide visual access in most cases and enhanced security by preventing pilferage through openings. 


Applications include shopping malls, convention centers, schools, garages and other institutional, commercial and retail projects. Side-folding grilles are available in open air and full closure models and feature multiple styles, patterns and colors. Rolling grilles are also available in open air and full closure models.

SECURITY GRILLES

CESG10 STRAIGHT PATTERN GRILLE

Open curtain, which allows air circulation, is formed with a series of horizontal rods 5/16″in diameter. Vertical O.C. separation between rods is 2″. Rods are available in aluminum -mill, clear or color anodized finish of alloy T5056 H32, solid stainless steel -polished 300 series, or solid galvanized steel. Vertical chains are formed of eyeletted aluminum or stainless steel on 9″, 6″, or 3″ centers. End chains are held in place by double E-rings on horizontal rods on both sides of chain to retain curtain ends in guides.

Sizes:Openings up to 40′ wide x 20′ high standard, consult factory for larger sizes.
Rolling Grille Benefits:Security: Grilles prevent unauthorized access and discourage forced entry at building exterior openings, storefronts or areas within buildings, such as pharmacies or parts counters. Used behind plate glass storefronts, they are a deterrent to smash-and-grab crime.
-Aesthetics: Curtains are available in either a straight (CESG10) or brick (CESG12) pattern in a variety of metal finishes from polished stainless, anodized aluminum, to dark bronze anodized. Adding beauty as well as security to the interior or exterior of a building.
-Design Flexibility: Clopay grilles are built to order to fit your opening size, operation and option preferences. -Early Installation Option: Early/easy self-supporting installation system lets grilles be fitted in before walls are built and before there is an opening. Structural tubular members, factory machined and fitted for grille guides and brackets, attach directly to the slab below and joists above ensuring proper fit and function of the grille unit.
-Space-saving: Curtain stores in a compact coil at the head of an opening to maximize the use of the interior space.
-Low life cycle cost: Clopay’s rugged construction and quality materials assure long life and less costly maintenance
Operation:Push-up, hand crank, hand chain (face of wall mounted exposed guides only) and motor operation. Standard push-up operation is acceptable for grilles under 10′-0″ in height or widths less than 16′-4″. For wider grilles where push-up operation is desired, see the EZ Lift Option below.
High Cycle Springs:If a grille is expected to operate more than 5 cycles per day, special high cycle construction is appropriate and is offered on the Model CESG12 Brick Pattern Grille.
Early Installation Option:Guides are supported with either structural steel tubes or wall mounting angles. Using structural steel support tubes allows for installation prior to the walls being built. The tubes can be factory prepped for the attachment of all grille components. Tubes are attached to the slab below and the joists above, thereby becoming self-supporting.
EZ Lift Push-Up Package for Wider Grilles:The EZ Lift package allows push-up operation on aluminum grilles up to 22′ wide by 10′ high. This results in added savings in initial costs and long term maintenance for building owners. Consult us for applicable sizes for stainless and galvanized steel Glazed panel Grille (CERG11) series.
Manual Release System:For use with motor operated grilles, this Manual Release system is utilized to meet building code emergency egress requirements. A wall mounted pull handle disengages the motor drive, which allows the grille to automatically open part way for egress. Releasing the pull handle resets the grille to normal operation.

 

CESG11 GLAZED PANEL GRILLE MODEL

An option available for increased protection from theft of small articles through the curtain, the Clopay Glazed panel grille is constructed of clear 12″ x 3″, 1/8″ thick Lexan¨ (or equal) panels. The flame retardant poly carbonate panels are secured by bronze color molded nylon links attached to 5/16″ diameter solid aluminum horizontal rods of alloy 5056 H32, creating a barrier against refuse, odors and smoke.

Sizes:Openings up to 40′ wide x 20′ high standard, consult factory for larger sizes.
Rolling Grille Benefits:Security: Grilles prevent unauthorized access and discourage forced entry at building exterior openings, storefronts or areas within buildings, such as pharmacies or parts counters. Used behind plate glass storefronts, they are a deterrent to smash-and-grab crime.
-Aesthetics: Curtains are available in either a straight (CESG10) or brick (CESG12) pattern in a variety of metal finishes from polished stainless, anodized aluminum, to dark bronze anodized. Adding beauty as well as security to the interior or exterior of a building.
-Design Flexibility: Clopay grilles are built to order to fit your opening size, operation and option preferences. -Early Installation Option: Early/easy self-supporting installation system lets grilles be fitted in before walls are built and before there is an opening. Structural tubular members, factory machined and fitted for grille guides and brackets, attach directly to the slab below and joists above ensuring proper fit and function of the grille unit.
-Space-saving: Curtain stores in a compact coil at the head of an opening to maximize the use of the interior space.
-Low life cycle cost: Clopay’s rugged construction and quality materials assure long life and less costly maintenance
Operation:Push-up, hand crank, hand chain (face of wall mounted exposed guides only) and motor operation. Standard push-up operation is acceptable for grilles under 10′-0″ in height or widths less than 16′-4″. For wider grilles where push-up operation is desired, see the EZ Lift Option below.
High Cycle Springs:If a grille is expected to operate more than 5 cycles per day, special high cycle construction is appropriate and is offered on the Model CESG12 Brick Pattern Grille.
Early Installation Option:Guides are supported with either structural steel tubes or wall mounting angles. Using structural steel support tubes allows for installation prior to the walls being built. The tubes can be factory prepped for the attachment of all grille components. Tubes are attached to the slab below and the joists above, thereby becoming self-supporting.
EZ Lift Push-Up Package for Wider Grilles:The EZ Lift package allows push-up operation on aluminum grilles up to 22′ wide by 10′ high. This results in added savings in initial costs and long term maintenance for building owners. Consult us for applicable sizes for stainless and galvanized steel Glazed panel Grille (CERG11) series.
Manual Release System:For use with motor operated grilles, this Manual Release system is utilized to meet building code emergency egress requirements. A wall mounted pull handle disengages the motor drive, which allows the grille to automatically open part way for egress. Releasing the pull handle resets the grille to normal operation.

 

CESG12 BRICK PATTERN GRILLE

Horizontal 5/16″ diameter solid aluminum rods at 2″ centers. Rods supported by heavy duty aluminum links, held in staggered position by tube spacers throughout the entire curtain assembly. Available in aluminum – mill, clear, or color anodized finish in alloy T5056 H32. High cycle construction (high cycle shaft and springs) available. Contact Clopay Commercial Information Assistance (CIA) with cycle requirements.

Sizes:Openings up to 40′ wide x 20′ high standard, consult factory for larger sizes.
Rolling Grille Benefits:-Security: Grilles prevent unauthorized access and discourage forced entry at building exterior openings, storefronts or areas within buildings, such as pharmacies or parts counters. Used behind plate glass storefronts, they are a deterrent to smash-and-grab crime.
-Aesthetics: Curtains are available in either a straight (CESG10) or brick (CESG12) pattern in a variety of metal finishes from polished stainless, anodized aluminum, to dark bronze anodized. Adding beauty as well as security to the interior or exterior of a building.
-Design Flexibility: Clopay grilles are built to order to fit your opening size, operation and option preferences. -Early Installation Option: Early/easy self-supporting installation system lets grilles be fitted in before walls are built and before there is an opening. Structural tubular members, factory machined and fitted for grille guides and brackets, attach directly to the slab below and joists above ensuring proper fit and function of the grille unit.
-Space-saving: Curtain stores in a compact coil at the head of an opening to maximize the use of the interior space.
-Low life cycle cost: Clopay’s rugged construction and quality materials assure long life and less costly maintenance
Operation:Push-up, hand crank, hand chain (face of wall mounted exposed guides only) and motor operation. Standard push-up operation is acceptable for grilles under 10′-0″ in height or widths less than 16′-4″. For wider grilles where push-up operation is desired, see the EZ Lift Option below.
High Cycle Springs:If a grille is expected to operate more than 5 cycles per day, special high cycle construction is appropriate and is offered on the Model CESG12 Brick Pattern Grille.
Early Installation Option:Guides are supported with either structural steel tubes or wall mounting angles. Using structural steel support tubes allows for installation prior to the walls being built. The tubes can be factory prepped for the attachment of all grille components. Tubes are attached to the slab below and the joists above, thereby becoming self-supporting.
EZ Lift Push-Up Package for Wider Grilles:The EZ Lift package allows push-up operation on aluminum grilles up to 22′ wide by 10′ high. This results in added savings in initial costs and long term maintenance for building owners. Consult us for applicable sizes for stainless and galvanized steel Glazed panel Grille (CERG11) series.
Manual Release System:For use with motor operated grilles, this Manual Release system is utilized to meet building code emergency egress requirements. A wall mounted pull handle disengages the motor drive, which allows the grille to automatically open part way for egress. Releasing the pull handle resets the grille to normal operation.

 

Side Folding Grilles and Closures provide security and access control in openings to 12′ high with low headroom conditions.

CESG30 Side Folding (Accordion) Grille Standard Pattern

Design:Open curtain, allowing free air circulation, formed by a series of vertical 5/16′ diameter aluminum tubes on 2″ centers. Horizontal chains are formed of eyletted aluminum links on 12′, 9″, 6″ or 3″ centers. A series of 6″ high continuous interlocking extruded aluminum hinge panels form the top and bottom of the curtain.
TrackOverhead track is an extruded heavy-duty aluminum section 1 1/2″ wide, 1 7/8″ High. Track required for curved openings has a standard 10″ radius: 90º, 120º, 135º and 150º. .
Materials & FinishesAluminum rods, tube spacers and link chains may be mill finish, clear or color anodized. Track, end members, intermediate members and hinged panels may be clear of color anodized.
Operation:Manual push/pull operation.

 

CESG31 Side Folding Lexan or Solid Grille

Design:Curtain with glazed or solid aluminum panels create a security barrier and blocks refuse, odors and smoke. Continuous vertical interlocking aluminum pivoting sections are set on 5 1/2″ centers. Interlocking sections are fitted with either glazing panels in clear, flame retardant 1/8″ thick polycarbonate material, G.E. Lexan or equal; or solid aluminum panels to deny visual access. Panels run full height between 5 1/2″ high extruded aluminum closure panels at top and bottom.
TrackOverhead track is an extruded heavy-duty aluminum section 1 1/2″ wide, 1 7/8″ High. Track required for curved openings has a standard 10″ radius: 90º, 120º, 135º and 150º. .
Materials & FinishesAluminum rods, tube spacers and link chains may be mill finish, clear or color anodized. Track, end members, intermediate members and hinged panels may be clear of color anodized
Operation:Manual push/pull operation.

9

ROLL-UP SHEET DOORS MODELS 150C, 157C, 160C
160CHeavy Duty12″ Coil
157CMedium Duty12″ Coil
150CLight Duty9″ Coil

Commercial Garage Doors: Coiling / Roll Up Sheet Doors

Constructed from 26ga by 24 in wide sheets of steel roll formed with integral grooves that are hemmed together to form a continuous sheet guided vertically by roll formed guides. Sheet coils around a spring loaded shaft above the header as the door is opened. Designed with ease of installation in mind.

160CHeavy Duty12″ Coil
157CMedium Duty12″ Coil
150CLight Duty9″ Coil
  • 26 gauge hot-dipped galvanized steel curtain with a baked-on silicone polyester top coat.
  • Roll-formed guides of hot-dipped galvanized steel (18 gauge 150C, 16 gauge 157C and 12 gauge 160C).
  • Self-lubricating wearstrips on curtain prevent metal-to-metal contact and muffle door noise.
  • Curtains are prepainted inside and out to inhibit rust. Hot-dipped, galvanized steel is painted with primer and given a tough oven-baked silicone polyester top coat, to provide the most rust-resistant steel door available.
  • Heavy-duty bottom bar withstands the external elements.
  • Full bulb-type bottom weatherstrip ensures proper fit along irregular floors.